1. Click this link or open up any regular browser and type 67.77.67.95 in the address line.

2. You will be prompted for a user name and password, which is case sensitive
a. User Name – ruggedcctv
b. Password – 75143
c. Port - 3000

3. Please refer to the CMS/Web browser manual for full instructions on how to use this interface and if you have any problems please contact tech support at 866-301-CCTV.

1. Click on this link to download and install the CMS software. Download and install all 4 components listed.

2. Once it is installed, double click on the CMS software icon that is now on your desktop.

3. Enter the admin login : 1111111 (The #1, seven times)

4. Click on the address book icon.



5. Click the add button

6. Fill in information as shown (password is 75143) then click ok.



7. When back on the address book click close.

8. Close program completely.

9. Launch program again following steps #2-#3

10. Once you have successfully connected to the Rugged CCTV DVR, you need to left click on the icon to the left of the

1. Click here to download the PDA software to your desktop PC and then sync your PDA to your computer.

2. On your computer unzip the PDA software, which is called Rugged Vision PDA.

3. Browse on your PDA sync folder for where you want to save the software, then drag the entire unzipped folder to that PDA directory.

4. On your PDA you will then need to browse for the saved .exe program and double click on it to open.

5. Click on the button in the upper left hand corner. A screen will appear to enter the access information. Enter the following information, which is case sensitive
a. DVR Address –67.77.67.95
b. Port 2000 (default)
c. User Name – ruggedcctv
d. Password - 75143

6. When you connect successfully, choose which live camera view to watch by clicking on the camera numbers near the bottom of the screen.

7. Please refer to the CMS/Web browser manual for full instructions on how to use this interface and if you have any problems please contact tech support at 866-301-CCTV.